Forum Jump: 
 374Likes
Reply
 
Thread Tools
post #1 of 392 Old 11-21-2018, 03:27 PM - Thread Starter
AVS Forum Special Member
 
pennynike1's Avatar
 
Join Date: Nov 2007
Location: Wisconsin
Posts: 1,116
Mentioned: 58 Post(s)
Tagged: 0 Thread(s)
Quoted: 523 Post(s)
Liked: 432
The *Official* Emotiva RMC-1 owners thread

Creating an official thread for the long-awaited and highly anticipated Emotiva RMC-1, the first home theater processor below $10,000 to allow 9.1.6 for Dolby Atmos!

The RMC-1 officially went live for sale on Emotiva's website at 12:00 midnight (CST) on 11/15 and sold out of their limited stock within 6-7 hours. Got my order submitted at 12:02 am. I received confirmation of shipment on Wednesday, 11/21.

Emotiva opened up their site for additional preorders on November 20th, with anticipated shipment dates for additional inventory at the end of December 2018 or early January 2019.

Congrats in advance to all the new RMC - 1 owners!
elvinps2626 likes this.

For sale: 4 Mackie c200 speakers, Sony HW40es projector, Tag Mclaren av32r preamplifier

Last edited by pennynike1; 11-26-2018 at 02:21 PM.
pennynike1 is online now  
Sponsored Links
Advertisement
 
post #2 of 392 Old 11-21-2018, 10:57 PM
AVS Forum Special Member
 
stef2's Avatar
 
Join Date: Mar 2005
Location: Canada
Posts: 1,268
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 481 Post(s)
Liked: 282
Good decision. A link to the preliminary manual:

http://http://cdn.shopify.com/s/files/1/2572/6926/files/RMC_user_v10_manual_PRELIMINARY.pdf?16731810225196 490549
pennynike1 likes this.

Last edited by stef2; 11-21-2018 at 11:02 PM.
stef2 is offline  
post #3 of 392 Old 11-25-2018, 01:24 AM
Advanced Member
 
Geronimo.USMC's Avatar
 
Join Date: Apr 2006
Posts: 946
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 240 Post(s)
Liked: 144
The "Official" Emotiva RMC-1 Owners Thread

I'm picking mine up tomorrow from UPS. I'll upload some pix.


*Some interesting info from the Emotiva forums;

  • From jnelson2000: "Dan emailed me direct this morning and let me relay what he conveyed. Adapters (XLR to RCA) are being fabricated and he expects them to be available after the new year as a courtesy. Meaning you will have to request them and will not be shipped as standard. Second, Dan also mentioned Dirac 2.0 will be available in the near future."
  • No Dirac out the box, but REW filters supported right now
  • Initial/cold boot, and startup up takes about 2 minutes. Future firmware should optimize this.
  • With "power on always" start up is now NOT an issue
  • Settings can be backed up via USB

- VIDEO: SONY OLED 65A1E | Panasonic UB820 | 44TB Synology DS1815+ | Dune Solo 4K | XBOX ONE X SCORPIO | PS4 PRO | Apple TV 4K | HTPC/Gaming Rig (Silverstone CW02B, Ryzen 2700X, Crosshair VII WiFi, 16GB, ASUS STRIX OC 1080TI, Auzen HDMI XFi)
- SOUND: (7.2.4 Atmos) EMOTIVA RMC-1 | D-SONIC M3A-2800-7 + CROWN XLS 2502, 1502 | KEF LS50, SVS Prime Elevations, Dual SB16-ULTRA Subs

Last edited by Geronimo.USMC; 11-29-2018 at 10:47 AM.
Geronimo.USMC is offline  
Sponsored Links
Advertisement
 
post #4 of 392 Old 11-26-2018, 11:00 AM
Advanced Member
 
Geronimo.USMC's Avatar
 
Join Date: Apr 2006
Posts: 946
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 240 Post(s)
Liked: 144
Didn't realize there was a thread already when I posted my "Official" thread. Thanks for merging. I will have to format my post again later. I just picked mine up. Will put up pix soon.
Geronimo.USMC is offline  
post #5 of 392 Old 11-26-2018, 08:36 PM
Advanced Member
 
Geronimo.USMC's Avatar
 
Join Date: Apr 2006
Posts: 946
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 240 Post(s)
Liked: 144
Plenty of pix.
Attached Thumbnails
Click image for larger version

Name:	20181126_162858.jpg
Views:	446
Size:	654.0 KB
ID:	2487782   Click image for larger version

Name:	20181126_163106.jpg
Views:	512
Size:	1.36 MB
ID:	2487784   Click image for larger version

Name:	20181126_163233.jpg
Views:	445
Size:	827.4 KB
ID:	2487788   Click image for larger version

Name:	20181126_163546.jpg
Views:	500
Size:	2.65 MB
ID:	2487792   Click image for larger version

Name:	20181126_163755.jpg
Views:	414
Size:	628.6 KB
ID:	2487794  

Click image for larger version

Name:	20181126_163849.jpg
Views:	567
Size:	2.07 MB
ID:	2487796   Click image for larger version

Name:	20181126_163903.jpg
Views:	550
Size:	1.24 MB
ID:	2487798   Click image for larger version

Name:	20181126_165253.jpg
Views:	529
Size:	1.41 MB
ID:	2487800   Click image for larger version

Name:	20181126_165413.jpg
Views:	383
Size:	652.0 KB
ID:	2487802   Click image for larger version

Name:	20181126_165439.jpg
Views:	530
Size:	1.63 MB
ID:	2487804  


- VIDEO: SONY OLED 65A1E | Panasonic UB820 | 44TB Synology DS1815+ | Dune Solo 4K | XBOX ONE X SCORPIO | PS4 PRO | Apple TV 4K | HTPC/Gaming Rig (Silverstone CW02B, Ryzen 2700X, Crosshair VII WiFi, 16GB, ASUS STRIX OC 1080TI, Auzen HDMI XFi)
- SOUND: (7.2.4 Atmos) EMOTIVA RMC-1 | D-SONIC M3A-2800-7 + CROWN XLS 2502, 1502 | KEF LS50, SVS Prime Elevations, Dual SB16-ULTRA Subs
Geronimo.USMC is offline  
post #6 of 392 Old 11-26-2018, 08:59 PM - Thread Starter
AVS Forum Special Member
 
pennynike1's Avatar
 
Join Date: Nov 2007
Location: Wisconsin
Posts: 1,116
Mentioned: 58 Post(s)
Tagged: 0 Thread(s)
Quoted: 523 Post(s)
Liked: 432
Thanks for posting the pics @Geronimo.USMC .

I have been waiting so long to have 9.1.6 capability on a processor at this price point, and it is really exciting to see this launch!!

The "potential" for 11.5.8 with the expansion slots, combined with Dirac room correction makes this RMC-1 that much more enticing!!!
Geronimo.USMC likes this.

For sale: 4 Mackie c200 speakers, Sony HW40es projector, Tag Mclaren av32r preamplifier
pennynike1 is online now  
post #7 of 392 Old 11-27-2018, 01:05 AM
Advanced Member
 
Geronimo.USMC's Avatar
 
Join Date: Apr 2006
Posts: 946
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 240 Post(s)
Liked: 144
Cool

My impressions so far:

So, I found some bugs. A factory Reset, and an HDMI cable swap (It worked perfectly fine on my AV8802A from my Panasonic 820) on my 4K player fixed all, except one of them. See my PC specs in my signature, because with my PC hooked up to it via HDMI, I get intermittent sound, and it won't lock on to the Multi-channel PCM coming directly from my 1080Ti graphics card. It will show video perfectly, but sound is super buggy....Calling Emotiva tech support about it in the morning. I bitstream from my optical players, and that works.

I love the fantastic front display on it, but the OSD Menu and GUI is super minimalist, and old-school. Quite jarring, as I've had "pretty" GUI and OSD from high end processors, and receivers, but it gets the job done. HDMI switching is slow, but not that bad. Sometimes there is a delay from the remote presses, and commands.

It is very light. About 25lbs. I was surprised about that when I picked it up.

A handy feature I used, was saving all my settings, input renaming, speaker distances, levels, etc, before I factory restored it. That worked like a charm.

I set up my distances, and levels. No impression on the sound yet!..........I just got this thing, plus DIRAC 2.0 is not out yet, and I have no UMIK-1 mic for REW. I'm looking for a used Cross Spectrum Labs version, if someone wants to lend or sell me one........[IMG class=inlineimg]/forum/images/smilies/wink.gif[/IMG]

- VIDEO: SONY OLED 65A1E | Panasonic UB820 | 44TB Synology DS1815+ | Dune Solo 4K | XBOX ONE X SCORPIO | PS4 PRO | Apple TV 4K | HTPC/Gaming Rig (Silverstone CW02B, Ryzen 2700X, Crosshair VII WiFi, 16GB, ASUS STRIX OC 1080TI, Auzen HDMI XFi)
- SOUND: (7.2.4 Atmos) EMOTIVA RMC-1 | D-SONIC M3A-2800-7 + CROWN XLS 2502, 1502 | KEF LS50, SVS Prime Elevations, Dual SB16-ULTRA Subs

Last edited by Geronimo.USMC; 11-27-2018 at 09:04 AM.
Geronimo.USMC is offline  
post #8 of 392 Old 11-27-2018, 07:29 AM
AVS Forum Special Member
 
mtbdudex's Avatar
 
Join Date: May 2007
Location: SE Michigan
Posts: 6,551
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 83 Post(s)
Liked: 1282
Looks like another 5 shipped yesterday


I’m a Denon 8500H owner since February 2nd 2018, been eyeing this to go beyond 9.2.4 / 7.2.6, so will be reading here and posting Q’s once Dirac 2.0 is released.



Sent from my iPhone using Tapatalk
mrci10 likes this.
mtbdudex is offline  
post #9 of 392 Old 11-29-2018, 07:51 AM
Senior Member
 
Join Date: Jun 2016
Location: Woodbridge, VA (25 miles south of D.C.)
Posts: 381
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 265 Post(s)
Liked: 181
No owners out there yet that wish to comment?

Spoiler!
RetiredandLovingIt is offline  
post #10 of 392 Old 11-29-2018, 10:45 AM
Advanced Member
 
Geronimo.USMC's Avatar
 
Join Date: Apr 2006
Posts: 946
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 240 Post(s)
Liked: 144
Quote:
Originally Posted by RetiredandLovingIt View Post
No owners out there yet that wish to comment?



I have.....
RetiredandLovingIt likes this.

- VIDEO: SONY OLED 65A1E | Panasonic UB820 | 44TB Synology DS1815+ | Dune Solo 4K | XBOX ONE X SCORPIO | PS4 PRO | Apple TV 4K | HTPC/Gaming Rig (Silverstone CW02B, Ryzen 2700X, Crosshair VII WiFi, 16GB, ASUS STRIX OC 1080TI, Auzen HDMI XFi)
- SOUND: (7.2.4 Atmos) EMOTIVA RMC-1 | D-SONIC M3A-2800-7 + CROWN XLS 2502, 1502 | KEF LS50, SVS Prime Elevations, Dual SB16-ULTRA Subs
Geronimo.USMC is offline  
post #11 of 392 Old 11-29-2018, 10:53 AM
AVS Forum Special Member
 
madhuski's Avatar
 
Join Date: Sep 2010
Location: Minnesota
Posts: 2,444
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1153 Post(s)
Liked: 718
Quote:
Originally Posted by Geronimo.USMC View Post
I have.....


how stable has it been so far? Any need to power cycle popppong up?

Selling in AVS classifieds
FS: Emotiva RMC-1 Processor
madhuski is online now  
post #12 of 392 Old 11-29-2018, 12:49 PM
Advanced Member
 
Geronimo.USMC's Avatar
 
Join Date: Apr 2006
Posts: 946
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 240 Post(s)
Liked: 144
Quote:
Originally Posted by madhuski View Post
Quote:
Originally Posted by Geronimo.USMC View Post
I have.....


how stable has it been so far? Any need to power cycle popppong up?
Yes, it's a little buggy, but bearable. A new firmware is slated for 1-2 days from now. My impressions so far are a couple posts up.

- VIDEO: SONY OLED 65A1E | Panasonic UB820 | 44TB Synology DS1815+ | Dune Solo 4K | XBOX ONE X SCORPIO | PS4 PRO | Apple TV 4K | HTPC/Gaming Rig (Silverstone CW02B, Ryzen 2700X, Crosshair VII WiFi, 16GB, ASUS STRIX OC 1080TI, Auzen HDMI XFi)
- SOUND: (7.2.4 Atmos) EMOTIVA RMC-1 | D-SONIC M3A-2800-7 + CROWN XLS 2502, 1502 | KEF LS50, SVS Prime Elevations, Dual SB16-ULTRA Subs
Geronimo.USMC is offline  
post #13 of 392 Old 11-30-2018, 04:26 AM
Advanced Member
 
JonasHansen's Avatar
 
Join Date: May 2008
Location: Denmark
Posts: 728
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 253 Post(s)
Liked: 124
Looking forward to the firmware upgrade. And especially a "review" on how it sounds. I am very interested in this processor for my theater but I am afraid of the Emotiva software bugs.

Home Theater: JBL M2 & SUB18 powered by Crown and BSS.
JonasHansen is offline  
post #14 of 392 Old 11-30-2018, 07:02 AM
AVS Forum Addicted Member
 
Archaea's Avatar
 
Join Date: Apr 2004
Location: Kansas City, MO
Posts: 10,677
Mentioned: 543 Post(s)
Tagged: 2 Thread(s)
Quoted: 3455 Post(s)
Liked: 3215
Post 271 documents @deewan ’s honest first few days of user experience. Summarily he noted buggy user interface, but great sound — seems a rushed, unfinished release.

http://net-al30.stream/forum/90-re...l#post57187326

Archaea's 9.8.4 Home Theater Room
(13) JBL CBT 70j-1 | Denon x7200wa | Sherbourn PA 7-350 amplifier | (8) Ultimax 18" sealed subwoofers | (4) iNuke DSP 6000 amplifiers | Panasonic PT-AE8000U projector | Jamestown 144" AT 2.35:1 screen w/ Seymour XD fabric
Archaea is offline  
post #15 of 392 Old 12-01-2018, 12:21 AM
Senior Member
 
Jerry Bruckheimer Fan's Avatar
 
Join Date: Nov 2015
Posts: 238
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 169 Post(s)
Liked: 94
I was wondering if anyone can comment on the XLR voltage output, in terms of pairing it with amplifiers and their respective input sensitivities.
Jerry Bruckheimer Fan is offline  
post #16 of 392 Old 12-01-2018, 01:32 AM
Member
 
santodx5's Avatar
 
Join Date: Feb 2004
Posts: 165
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 97 Post(s)
Liked: 14
I would love to know comparison vs 8805 as I want to buy new processor soon.


Thanks
santodx5 is offline  
post #17 of 392 Old 12-01-2018, 03:27 AM
Member
 
santodx5's Avatar
 
Join Date: Feb 2004
Posts: 165
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 97 Post(s)
Liked: 14
Quote:
Originally Posted by Geronimo.USMC View Post
My impressions so far:

So, I found some bugs. A factory Reset, and an HDMI cable swap (It worked perfectly fine on my AV8802A from my Panasonic 820) on my 4K player fixed all, except one of them. See my PC specs in my signature, because with my PC hooked up to it via HDMI, I get intermittent sound, and it won't lock on to the Multi-channel PCM coming directly from my 1080Ti graphics card. It will show video perfectly, but sound is super buggy....Calling Emotiva tech support about it in the morning. I bitstream from my optical players, and that works.

I love the fantastic front display on it, but the OSD Menu and GUI is super minimalist, and old-school. Quite jarring, as I've had "pretty" GUI and OSD from high end processors, and receivers, but it gets the job done. HDMI switching is slow, but not that bad. Sometimes there is a delay from the remote presses, and commands.

It is very light. About 25lbs. I was surprised about that when I picked it up.

A handy feature I used, was saving all my settings, input renaming, speaker distances, levels, etc, before I factory restored it. That worked like a charm.

I set up my distances, and levels. No impression on the sound yet!..........I just got this thing, plus DIRAC 2.0 is not out yet, and I have no UMIK-1 mic for REW. I'm looking for a used Cross Spectrum Labs version, if someone wants to lend or sell me one........[IMG class=inlineimg]/forum/images/smilies/wink.gif[/IMG]

Halo can you do a comparison review vs 8802A? I have 8802A and now thinking to get 8805 until I read about RMC-1.


Thanks
santodx5 is offline  
post #18 of 392 Old 12-01-2018, 05:36 AM
AVS Forum Special Member
 
mmiles's Avatar
 
Join Date: Oct 2002
Location: Delaware
Posts: 3,888
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 773 Post(s)
Liked: 393
It sounds like the RMC-1 escaped rather than released.
unretarded likes this.
mmiles is offline  
post #19 of 392 Old 12-01-2018, 05:45 AM
Member
 
Th601's Avatar
 
Join Date: Aug 2018
Posts: 53
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 49 Post(s)
Liked: 10
Quote:
Originally Posted by santodx5 View Post
I would love to know comparison vs 8805 as I want to buy new processor soon.


Thanks


Me too, I’m interested that as well


Sent from my iPhone using Tapatalk
Th601 is offline  
post #20 of 392 Old 12-01-2018, 11:34 AM
AVS Forum Special Member
 
petew's Avatar
 
Join Date: Oct 2000
Location: Albuquerque, NM USA
Posts: 2,119
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 29 Post(s)
Liked: 69
Earlier post said the unit was light. Dan mentioned "no 60 Hz inside the box". Must be a switch mode power supply.

High Desert Theater - work in progress
Building Bass - Subs
Surrounds - Easy as Pi
Storage - unRAID unDELL
Mains - Another piece of Pi
petew is offline  
post #21 of 392 Old 12-01-2018, 12:23 PM
Advanced Member
 
Geronimo.USMC's Avatar
 
Join Date: Apr 2006
Posts: 946
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 240 Post(s)
Liked: 144
Quote:
Originally Posted by santodx5 View Post
I would love to know comparison vs 8805 as I want to buy new processor soon.


Thanks
Quote:
Originally Posted by santodx5 View Post
Halo can you do a comparison review vs 8802A? I have 8802A and now thinking to get 8805 until I read about RMC-1.


Thanks
Quote:
Originally Posted by Th601 View Post
Me too, I’m interested that as well


Sent from my iPhone using Tapatalk
Hi, guys. My AV8802A was sold the day before I received it. It sounds really good though. One user in the Emotiva Forums says that its sound quality is better than his AV8805! I suggest that prospective buyers wait after a few firmware updates, or when Dirac 2.0 is released. Its software needs to mature. The RMC-1 is currently very buggy, with its OSD, and sluggish menus, but I'm a tinkerer, and besides the buggy interface, sounds clean. I just ordered a Cross-Spectrum Acoustics calibrated UMIK-1 and will play with REW and the system in my signature below.
mtbdudex and Th601 like this.

- VIDEO: SONY OLED 65A1E | Panasonic UB820 | 44TB Synology DS1815+ | Dune Solo 4K | XBOX ONE X SCORPIO | PS4 PRO | Apple TV 4K | HTPC/Gaming Rig (Silverstone CW02B, Ryzen 2700X, Crosshair VII WiFi, 16GB, ASUS STRIX OC 1080TI, Auzen HDMI XFi)
- SOUND: (7.2.4 Atmos) EMOTIVA RMC-1 | D-SONIC M3A-2800-7 + CROWN XLS 2502, 1502 | KEF LS50, SVS Prime Elevations, Dual SB16-ULTRA Subs
Geronimo.USMC is offline  
post #22 of 392 Old 12-01-2018, 05:23 PM
AVS Forum Addicted Member
 
Roger Dressler's Avatar
 
Join Date: Jul 2000
Location: Oregon
Posts: 11,204
Mentioned: 82 Post(s)
Tagged: 0 Thread(s)
Quoted: 2721 Post(s)
Liked: 1554
Quote:
Originally Posted by petew View Post
Dan mentioned "no 60 Hz inside the box". Must be a switch mode power supply.
Even with a switch mode supply, there's 60 Hz in the box from the power cord.
7ryder likes this.

Deadwood II Theater (Previous Deadwood Theater HTOM)
Anthem AVM 60 7.4.4; Classé SSP-800 PLIIx 7.4; MiniDSP OpenDRC-AN
Oppo UDP-203; Oppo BDP-93; Win7 media PC w/Roon+Kodi; Roku Ultra; DirecTV Genie
Aerial Acoustics 7B/CC3B LCR, KEF Ci200QS 4 srrnd, Tannoy Di6 DC 4 hts, Hsu ULS-15 4 subs
JVC RS520; Stewart Cima Neve screen 125" diag 2.35:1, MLP at 115"
Roger Dressler is offline  
post #23 of 392 Old 12-01-2018, 07:34 PM - Thread Starter
AVS Forum Special Member
 
pennynike1's Avatar
 
Join Date: Nov 2007
Location: Wisconsin
Posts: 1,116
Mentioned: 58 Post(s)
Tagged: 0 Thread(s)
Quoted: 523 Post(s)
Liked: 432
How does the power supply compare to the Marantz 8805?

I have researched the 2 different power supplies a bit. Seems linear is old school.

I believe the marantz uses a linear power supply, which is less efficient and heavier, but that a linear supply also offers benefits regarding high frequency noise.

Anyone who can provide further insight would be appreciated.

For sale: 4 Mackie c200 speakers, Sony HW40es projector, Tag Mclaren av32r preamplifier

Last edited by pennynike1; 12-01-2018 at 08:46 PM.
pennynike1 is online now  
post #24 of 392 Old 12-02-2018, 01:56 PM
AVS Forum Addicted Member
 
BassThatHz's Avatar
 
Join Date: Apr 2008
Location: Northern Okan range (NW Cascades region)
Posts: 10,360
Mentioned: 199 Post(s)
Tagged: 0 Thread(s)
Quoted: 3529 Post(s)
Liked: 3980
In both cases, the power supplies convert the 60hz AC into DC.
For amplifiers it would be 120VAC to 200-400VDC, and for pre's it would be 120VAC to 5-12VDC.

Most switch mode supplies operate around 200khz square waves, where as the older Emo's like the UMC-1 and Marantz and Rotel and Classe and McIntosh are toroidal 60hz, or even older still: E-Core 60hz.

In both cases this is then filtered with noise chokes, rectifiers and boost/buck capacitors for smoothing the DC.
This then feeds the screen, the DAC's, the XLR op-amps, the HDMI board, wifi/usb/cat5 board, radio board, the whatever board, and the DSP chip (or in the case of Trinnov an intel i7 CPU/motherboard/ram).

In the case of a transformer the audio ground could be the center-tap, for switch-mode it would have no choice but to use the power cord house ground, which is less clean because it's shared with your microwave, and all the microwaves on your street and everything else. Including yard lightning strikes, worse yet, no device shall filter the ground line as that violates every UL/MIL/ETL/CSA/IEEE electronics-code and building-code ever made!

I own an XSP-1, an Oppo 105(Sabre DAC), a 7705(AKM) and a Motu (Sabre DAC).
The XSP-1, 105, and Motu use a SMPS, and the 7705 uses a toroidal.
The XSP-1, 105 and Motu all sound the same to me, and the 7705 is about 97% as good IMO, but only in pure-mode. I haven't had a chance to use Atmos mode on my 108db/w/m tweeters yet (next weekend I will though), I'd expect the SQ to drop because all DAC's are more noisy in all-channels mode + all the other circuitry, and my mains are very sensitive. (I don't use audyssey or dirac, and likely never will...)

The XSP-1 is 100% Class-A analog. Comparable noise floor to the XMC-1 in 2-ch pure-mode.
Not sure what the AKM or Sabre DAC's operate as...
The Sabre DAC's have vanishingly low noise, as you probably already know...

It would explain why the new Emotiva's are lighter, they don't have a large block of copper in them...
Theoretically all DC should be made equal, i.e. clean. Anything less than perfection would be a horrendous mistake by the designer at this level of audio...

Last edited by BassThatHz; 12-02-2018 at 03:05 PM.
BassThatHz is offline  
post #25 of 392 Old 12-02-2018, 07:19 PM
AVS Forum Addicted Member
 
BassThatHz's Avatar
 
Join Date: Apr 2008
Location: Northern Okan range (NW Cascades region)
Posts: 10,360
Mentioned: 199 Post(s)
Tagged: 0 Thread(s)
Quoted: 3529 Post(s)
Liked: 3980
It's hard to see and so it's not super clear, but it appears the audio/video ground is coming from within the SMPS.
Don't quote me on any of this stuff.
Attached Thumbnails
Click image for larger version

Name:	rmc1.0.png
Views:	2680
Size:	2.29 MB
ID:	2490554  
Geronimo.USMC and elvinps2626 like this.

Last edited by BassThatHz; 12-02-2018 at 07:37 PM.
BassThatHz is offline  
post #26 of 392 Old 12-03-2018, 10:25 PM
Member
 
santodx5's Avatar
 
Join Date: Feb 2004
Posts: 165
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 97 Post(s)
Liked: 14
Which has better DAC chips? RMC-1 or 8805?


Thanks
santodx5 is offline  
post #27 of 392 Old 12-03-2018, 11:46 PM
Member
 
antrantr's Avatar
 
Join Date: Feb 2018
Posts: 22
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 26 Post(s)
Liked: 0
Quote:
Originally Posted by santodx5 View Post
Which has better DAC chips? RMC-1 or 8805?


Thanks
8805: AK4490 32 bit
RMC-1: AKM4490Verita

According to google it's the same
Attached Thumbnails
Click image for larger version

Name:	1.png
Views:	107
Size:	107.6 KB
ID:	2491158  
antrantr is offline  
post #28 of 392 Old 12-04-2018, 10:13 AM
AVS Forum Special Member
 
Mashie Saldana's Avatar
 
Join Date: Dec 2008
Location: UK
Posts: 1,972
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 1072 Post(s)
Liked: 878
Can you run the RMC-1 in any other 15ch mode than 9.1.6 such as 11.1.4 or 7.1.8?

Tower Cinema - 9.1.6 in a 12'x12' room
Input : Nvidia Shield TV, Panasonic DMP-UB400
Magic : Marantz SR7010, Marantz SR6010, 2x NAD T743
Output : Panasonic TX65EZ952B, SVS PB13 Ultra, Monitor Audio GSLCR 2xGS20 2xGS10 4xGSFX 6xBX1
Mashie Saldana is offline  
post #29 of 392 Old 12-04-2018, 10:42 AM
AVS Forum Special Member
 
bigguyca's Avatar
 
Join Date: Oct 2007
Location: East Turkestan
Posts: 1,486
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 920 Post(s)
Liked: 737
Quote:
Originally Posted by santodx5 View Post
Which has better DAC chips? RMC-1 or 8805?


Thanks
Quote:
Originally Posted by antrantr View Post
8805: AK4490 32 bit
RMC-1: AKM4490Verita

According to google it's the same

FYI, in AKM's DAC lineup, the AC4493, which has been available for about a year, is the replacement for the AK4490. There is a small performance increase with the new AK4493 as noted in the 2nd link below. No doubt future products will have this new DAC. Here are links to more information:

- Overall high-end ADM lineup:

http://www.akm.com/akm/en/product/d...nk_id=link5012

- AK4493 information:

http://www.akm.com/akm/en/product/d...artno=AK4493EQ
bigguyca is offline  
post #30 of 392 Old 12-04-2018, 01:29 PM
AVS Forum Special Member
 
deewan's Avatar
 
Join Date: Dec 2005
Location: East Central Iowa
Posts: 2,451
Mentioned: 58 Post(s)
Tagged: 0 Thread(s)
Quoted: 567 Post(s)
Liked: 744
Quote:
Originally Posted by Mashie Saldana View Post
Can you run the RMC-1 in any other 15ch mode than 9.1.6 such as 11.1.4 or 7.1.8?
Right now my answer would be no. If you are aware of how the Emotiva processor onscreen menus appear, I'll try to explain why there are limiting factors of speaker setup right now. But also why I think with the future add-on modules and a firmware update the answer should be yes.

*This may not be 100% accurate since I am going by memory. I can try to add pics tonight*
I currently have the RMC configured in a 9.1.6 setup. I have three front speakers, two pairs of side surround speakers, one pair of rear surround and three pairs of overhead. While accessing the Emotiva menus for speaker setup the have a generic label on the screen that coordinates with the labeled XLR outputs. For each output you can turn them on/off, set the speaker size to small/large and physical location (front, middle, rear). The options right now limit you on which outputs can be used for what. For example you cannot go into the Front Left speaker and turn it into a overhead. In the same way you cannot go into a overhead and turn it into a second front left output (at least not from what I remember while setting up my system).

HOWEVER, I believe when the add-on modules are added each of the new channels could be given the same options I listed above of on/off, speaker size, front/middle/rear and also overhead, side or LFE. I still believe the base 5.1 XLR outputs may always be set in stone and not re-assignable, but that is just my guess.

Clear as mud?

The Other Theater (most recent build)
Old Woods Remodel
Old Wood Theater (first build)
Emotiva RMC-1 9.1.6 | JVC X790R | Emotiva XPA-5 | Emotiva XPA 4-3s | Oppo 203 | DIYSG 1099 | DIYSG Volt 8 | DIYSG Volt 6 | SVS PC-4000 | Seymour UF 132"
deewan is offline  
Sponsored Links
Advertisement
 
Reply Receivers, Amps, and Processors



Forum Jump: 

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off