Sooo... Update time!
madmeasure dynamic Tool V2.9.8
1) Mutiple path selection!
It also remembers:
a) that you had chosen "paths" last time you had the programm running
b) it remembers the paths you had chosen as well
--> So basically, you open the programm and if you want use the same settings as last time, just press Start!
2) Dynamic Target Nits during as movie!
--> To activate this, just check the "dynamic" checkbox next to "TARGET NITS Selection"
I advise to use "Flo" as a profile for both Static Target Nits and Dynamic Target Nits.
It is scalable with your real peak nits and works very well in my opinion.
For the dynamic target nits, you need to choose:
a) your real peak nits
b) Rolling avg time in frames--> I advise to keep it at the default value of 240 frames, it works very well like this.
c) Minimum Target Nits allowed --> Here I advise to peak your real nits to maximize dynamic advantages.
of course, you can choose 200nits.
d) Maximum Target Nits allowed --> 1000nits default.
I'll tell more about the dynamic target nits algo tomorrow. But from my testing, it works very well and provide a completely new experience.
No more compromise!
Example of the automatic target nits on the MEG with the above selected settings and 107 peak nits:
Target Nits: 971
Target Nits: 975
Target Nits: 624
Target Nits: 643
Target Nits: 520
Thanks again for the new measurement file format. It works great for dynamic target nits.
However, as I told you per PM and that you can now see on the screenshot, the madVR only reads the dynamic target nits from the measurement file, when "dynamic target nits" flag is selected in the measurement file.